BOSTONSTANGS.COM

Silver GT · Silver GT

My car is a 00 GT with a 2V and a 5spd. I really want to do heads and cams this summer and i was looking at patriot stage 2 but I hear alot of ppl say that there junk. This is my daily driver so I dont want anything too crazy but I def want good power! So what would you guys recomend for heads/cams?

supertukes · supertukes

so im pretty sure i bent a pushrod today, put the new valve covers on and went to go for a ride now that all my oil isnt getting sucked out, anyway, making a real loud ticking sound from one of the covers, no the cover isnt hitting i already checked that. but when i pulled the cover back off one of the rockers lo...

droptopfox · droptopfox

what is the sensor on the drivers side of the lower intake towards the front it has 2 wires going to it looks like a temp sensor mines broken i dont know what it is

93 LX FiveO · 93 LX FiveO

just finished my cobra heads and intake swap. had it running great and then all of a sudden started pouring coolant out of the thermostat housing. i put a wrench on the top bolt and it was...

BADASS03SVT · BADASS03SVT

who has seen one of these speedo sensors before? what I need is the piece that plugs INTO this and has the wires on it so I can ha...

BADASS03SVT · BADASS03SVT

so for 2 weeks now I have been claling and posting about this with no solid answer. who has, or knows someone that has a c4. what size are the fittings that go into the cooler lines?!?!?!?!?! Ive been told 1/8" npt 1/8" straight thread 1/8-27 1/8" nps Im about done w/ this...

jgt8229 · jgt8229

so i got my car running, and theres really loud clunking noises like metal on metal or something. i am thinking its something in the vauvle train, mable miss adjusted or loose vauvles, but i really dont know. the smogg port in the back of the heads are open but i pluged them and it made little difference. h...

wheels · wheels

so i replaced the following: rack to a cobra rack struts and c/c plates before i went to get an alignment today i took it for a test drive. every time i go over a bump it makes like a rattle noise that it never did before. so i checked every single bolt that i touched was tight. wich they were. so then i figu...

Fitzy · Fitzy

Any suggestions or help?

SickNastee392 · SickNastee392

The car is a 2004 mach 1. While driving it the other day, the gauge cluster would start to flutter on and off. Then after i would shut the car off it would not start back up unless i let it sit for 10 mins. I already went through the whole car. the alternator is fine and all the connection are working great. Cou...

sdcham1 · sdcham1

Okay I am building a 98 Cobra that is a track only car, I am running a 1993 302 based motor, with a painless wiring harness, this was the quickest and best way to get the wiring thing done, anyway I need to find a one wire alt, I am looking at a powermaster unit, about 140 amps, but they also sell a 100 amp unit, w...

supertukes · supertukes

so i just upgraded to v8 spoindles and now its driving real funny, im assuming it threw my alignment off? im not sure what else would be the problem but its pulling the wheel pretty bad, hard to explain exactly but any ideas?

junior611 · junior611

I have a TF intake set up and im haveing trouble with the airlines setup. If anyone has any pics that can help me out or, if u live in the norwood area maybe you can give me a hand plz. jus trying to get my car started. thx for reading

5pointslow · 5pointslow

building a 408 8.5.1 compression, t trim, throwing a lot of boost but was wondering staying with efi if i need to stay with an egr valve or can i block off it off or is it gonna make the car detonate and run like shit?

5p0inToH · 5p0inToH

... so heres my problem, i recently posted the pictures of my car and was told the intake i have on the car is killing my low end tourqe, im current running this setup in the picture but was told because the car is n/a thats not the right intake for it.... anyone have any suggjestions at the best and easies...

boostd710 · boostd710

so my buddy (timbo8650) has a 86 gt that is converted to mass air. The other day the car was running fine, we pulled into a store and when he got back in and tried to fire her up, nothing happened. It acted like the battery was dead as it would not crank at all. All you could hear was a click of a solinoid (sp?). I...

jgt8229 · jgt8229

wel i was looken under my hood, and i musta hit the starter selnoid with something it tried to crank luckly my batterys dead, it jerked a lil. did seem like anything damage got done like me geting ran over. but now my shift well come out of gear like my clutch is ingaged all the time, it take no effort to shift...

sem76 · sem76

I'm trying to figure out what will work good with my set up. I accumilated a few parts that Im putting on this Spring. I've found an original upper and lower Cobra manifold. 70mm tb, 24lb injectors 73mm meter calibrated for 24lb, and shorty bbk headers. I'm hoping to somehow gather up some money for a cam...

Phoenixx · Phoenixx

So I want to put a remote start in my del sol. I've always done Vipers in the past, I know they're good but they're also pricey and I don't have a whole lot of extra cash right now. Does anyone know anything about the Python 1400s/what they usually go for? Also I am awful at wiring stuff, like really awful....

mustang50lx88 · mustang50lx88

Sorry Posted in the wrong section, please see post in the "Suspension Thread" -- Edited by mustang50lx88 at 16:58, 2009-02-02

boostd710 · boostd710

So my question is will i need a better alternator now that I have under drive pullies? its a 94 5.0 motor, cobra upper/lower, gt40 heads, b303, 24lb injectors, 93 cobra mass air, msd6al, a/c delete, smog delete. I run subs in my car since its my daily driver. I never really had a problem other than dimming...

junior611 · junior611

does neone have any info on the 94 Gt Motor? why it has less horse power than the my 90 GT? how it is when adding a E303 cam or ne cam? wat cam would u put in? how are the pistons? How are the heads and what kind? I'm asking these questions, cuz i got my first mustang and ima buy a 94 Gt Motor to swap in c...

jgt8229 · jgt8229

ok so i finaly finish the head gaskets on my 5.0. got everything togthere its cranking like it wants to start but wont ingnite. any sudjustions , im dien to get my ccar back

bleed blue · bleed blue

http://search.ebscohost.com/login.aspx?authtype=url%2cuid

T76 Cobra · T76 Cobra

trying to see the best way to store a short block ...the 89gt im parting out has a nice short block and if no 1 buys it in next couple of days i want to keep it till spring ....its sitting in the car still with no heads on it under a car cover but i want to see what the best way of keeping it fresh would be ...

5p0inToH · 5p0inToH

Alright guys whatsup, heres what im thinking, i really want to put a nitrous kit in my car (jims oldcar) what do you think would be the best kit for the car... not looking for nothing crazy and not much experiance with nitrous so im just trying to get into it.... im getting a kit either way so a little advice...

supertukes · supertukes

well i have a/c delete (the one that moves the p/s pump up) and no smog pump, i had the right size belt but i switched my alt. pulley back to stock because it wasnt charging enough, now my belt is just a bit long, so i have stock pulleys on my alt. and p/s pump, and aftermarket on my water pump and c/s, anyone kno...

Pitbull11 · Pitbull11

ok I just spent the last 2 days completely converting a 91 convertible 4 cylinder auto to an 88 5.0 with 5spd. my question is the pink with black wire for the fuel pump is not getting power to turn the pump on. I can manually put power to that wire with my power probe and the car runs. I know the 4cylinder har...

droptopfox · droptopfox

my truck a 1998 f 150 4.6 has been a good truck re3cently the water pump went i put a new water pump in it and now it seems to be getting to much pressure as soon as it warms up it sprays out of the resavor any help would be great

Silver GT · Silver GT

ive got the prostreet upper and lowers on my car and when i installed them i noticed the uppers were about a 1/4" shorter than the stock ones. it messed w my pinion angle and now it vibrates. the car is lowered 2" too. didnt know if anyone else has ran into this or atleast noticed that the uppers w...

janandjaiden · janandjaiden

ok i need some help or ideas from every one , , ok car is getting put on jack stand's and get covered . i know i have a few odds and ends to make meet on the car . i want to go to a carb set up but my problem is that i do know if i want the biggest big block stroker long block they make or do i do a 331 or 347 stroker , by the ti...

bleed blue · bleed blue

is it possible to swap heads with out dropping the motor also i will be putting in studs so is there enough clearance to do so

stang1990 · stang1990

hi guys im in the look for a stage 2 clutch, can i put that on my stock 302 motor i just want a clutch that by letting the clutch pedal go a little the car spins rubber, i have a 90 fox 302 motor with aftermarket pulleys an an intake, can i do a stage 2 or 3 on it thanks.

luke · luke

is this turbo big enough 2 run a single setup off of?

LX546 · LX546

I have dual 16 volt batteries and I am currently running a Powermaster XS Volt Alternator. I think one of my batteries dead and caused my alternator to work over time. I have to check tomorrow but I am sure the adjustable regulator over heated and craped out. I have a 12 Volt alternator that I can put in the...

wheels · wheels

Mustang 2001 through 2004 Pushbutton Engine Start Modification

wheels · wheels

19962004 4.6L 2V Throttle Body & Plenum Flow Results (maximum flow in CFM) MAKES A GOOD POINT

janandjaiden · janandjaiden

on my id numbers on my drivers door i tried to decode it but no luck , ok let me explain when i got the mustang the guy told me it was a gt but it gets better i went to insure it it came up as a mustang gt / cobra gt , the color of the car is reefblue that only the cobras came with in 1993 and other things on this car point...

snakebite · snakebite

1993 COBRA DRIVERS DOOR MINT CONDITION NEEDS DOOR HANDLE HAS GLASS $100 1993 COBRA REAR BLACK TWEED SEAT $150 VERY NICE 2 NITTO DRAG RADIAL TIRES 245/45/17 GOOD FOR MAYBE 1 DAY AT THE TRACK THEY ARE LOW IN TREAD $25 2 235/40/18 NEXEN TIRES %50-60 TREAD $40 1995 GT AUTO TRANS JUST REBUILT WITH SHI...

bleed blue · bleed blue

dose anyone know what is a safr or max amount of boost yu can blow threw a stock internal 04

bleed blue · bleed blue

well it never acted up before but now i have installed a throttle body and plenum and keep getting a tps code is there a certai way to put that back on please HELP

93fox · 93fox

getting prety sick of this shit with my car i reset the car at top dead center i have spark 45psi of fuel pressure and injector pulse but it wont start im thinkin it might be my pcm anyone have any ideas?

boostd710 · boostd710

Does anyone have a timing pointer for an 86 GT 5.0?? My buddy's motor doesnt have one and he has been driving it timed by ear only for a couple years now. Well Im trying to get him to drive sunday for the meet so I can go finally and he said he'll go if he can get his car timed... Recently its acting like its flo...

supertukes · supertukes

whats needed to swap brakes from a v8 car to 4cyl? my car was orig. 4cyl and im looking into doing the brakes, i kno spindles/calipers and pads/rotors.....anything else?

Mustswang · Mustswang

I have run into a problem installing my new radiator and turbo setup. The problem is that the inlet to the rad is very close to the outlet of the turbo and the exhaust. I don't see anyway I could have a hose connected to the inlet without it being severely kinked or damaged from heat. This is a universal rad...

stang1990 · stang1990

hi guys i have a 1990 mustang 5.0 and its my fathers and the guy we bought it from said he play with the timing so is at 14 but i drive the car and if i rev it to shift it hesitated and looses power and a small explosion comes out and power comes back can anybody tell me whats that i dont now much about mustang but i w...

rbaxter85 · rbaxter85

I need to do the brakes on my car, what does everyone think of this deal from Summit? Rotors and Pads -- Edited by rbaxter85 at 20:23, 2008-10-09 -- Edited by rbaxter85 at 20:26, 2...

mikefheath87 · mikefheath87

i dont know how this happened on my F150.

The Sticker Guy · The Sticker Guy

tried finding info online but no luck...trying to find the wheel bolt pattern for a 93 bronco

boostd710 · boostd710

http://westernmass.craigslist.org/cto/854316979.html.

Topic		Started By	Replies	Views	Last Post
	WHAT HEADS TO GO WITH??? (Preview) My car is a 00 GT with a 2V and a 5spd. I really want to do heads and cams this summer and i was looking at patriot stage 2 but I hear alot of ppl say that there junk. This is my daily driver so I dont want anything too crazy but I def want good power! So what would you guys recomend for heads/cams?	Silver GT	3	585	Apr 12, 2009 by Mineral 02
	sooo, bent pushrod? (Preview) so im pretty sure i bent a pushrod today, put the new valve covers on and went to go for a ride now that all my oil isnt getting sucked out, anyway, making a real loud ticking sound from one of the covers, no the cover isnt hitting i already checked that. but when i pulled the cover back off one of the rockers lo...	supertukes	6	580	Apr 10, 2009 by supertukes
	i need a quick answer sensor (Preview) what is the sensor on the drivers side of the lower intake towards the front it has 2 wires going to it looks like a temp sensor mines broken i dont know what it is	droptopfox	3	607	Apr 10, 2009 by droptopfox
	broken bolt.. what to do (Preview) just finished my cobra heads and intake swap. had it running great and then all of a sudden started pouring coolant out of the thermostat housing. i put a wrench on the top bolt and it was...	93 LX FiveO	16	826	Apr 9, 2009 by Silver GT
	How bout this? C4 speedo??? (Preview) who has seen one of these speedo sensors before? what I need is the piece that plugs INTO this and has the wires on it so I can ha...	BADASS03SVT	4	671	Apr 8, 2009 by BADASS03SVT
	Need help w/ C4 fittings!!! (Preview) so for 2 weeks now I have been claling and posting about this with no solid answer. who has, or knows someone that has a c4. what size are the fittings that go into the cooler lines?!?!?!?!?! Ive been told 1/8" npt 1/8" straight thread 1/8-27 1/8" nps Im about done w/ this...	BADASS03SVT	3	530	Apr 8, 2009 by BADASS03SVT
	bad sounds video (Preview) so i got my car running, and theres really loud clunking noises like metal on metal or something. i am thinking its something in the vauvle train, mable miss adjusted or loose vauvles, but i really dont know. the smogg port in the back of the heads are open but i pluged them and it made little difference. h...	jgt8229	38	1005	Apr 5, 2009 by jgt8229
	damn noise (Preview) so i replaced the following: rack to a cobra rack struts and c/c plates before i went to get an alignment today i took it for a test drive. every time i go over a bump it makes like a rattle noise that it never did before. so i checked every single bolt that i touched was tight. wich they were. so then i figu...	wheels	5	626	Apr 4, 2009 by Mineral 02
	Installing MAC long tube headers (Preview) Any suggestions or help?	Fitzy	10	628	Apr 3, 2009 by GTStang
	mach 1 wont start (Preview) The car is a 2004 mach 1. While driving it the other day, the gauge cluster would start to flutter on and off. Then after i would shut the car off it would not start back up unless i let it sit for 10 mins. I already went through the whole car. the alternator is fine and all the connection are working great. Cou...	SickNastee392	4	662	Apr 2, 2009 by snakebite
	Need advice on a one wire alt (Preview) Okay I am building a 98 Cobra that is a track only car, I am running a 1993 302 based motor, with a painless wiring harness, this was the quickest and best way to get the wiring thing done, anyway I need to find a one wire alt, I am looking at a powermaster unit, about 140 amps, but they also sell a 100 amp unit, w...	sdcham1	3	565	Apr 1, 2009 by sdcham1
	v8 spindles (Preview) so i just upgraded to v8 spoindles and now its driving real funny, im assuming it threw my alignment off? im not sure what else would be the problem but its pulling the wheel pretty bad, hard to explain exactly but any ideas?	supertukes	0	507	Mar 29, 2009 by supertukes
	having trouble installing my Trick Flow Upper Intake (Preview) I have a TF intake set up and im haveing trouble with the airlines setup. If anyone has any pics that can help me out or, if u live in the norwood area maybe you can give me a hand plz. jus trying to get my car started. thx for reading	junior611	0	501	Mar 21, 2009 by junior611
	egr valve? do i need it? (Preview) building a 408 8.5.1 compression, t trim, throwing a lot of boost but was wondering staying with efi if i need to stay with an egr valve or can i block off it off or is it gonna make the car detonate and run like shit?	5pointslow	32	2423	Mar 9, 2009 by bsfstang50
	Need Intake Help!!!!! (Preview) ... so heres my problem, i recently posted the pictures of my car and was told the intake i have on the car is killing my low end tourqe, im current running this setup in the picture but was told because the car is n/a thats not the right intake for it.... anyone have any suggjestions at the best and easies...	5p0inToH	14	937	Mar 2, 2009 by LX546
	86GT starting issues... help please (Preview) so my buddy (timbo8650) has a 86 gt that is converted to mass air. The other day the car was running fine, we pulled into a store and when he got back in and tried to fire her up, nothing happened. It acted like the battery was dead as it would not crank at all. All you could hear was a click of a solinoid (sp?). I...	boostd710	5	609	Feb 15, 2009 by mustang50lx88
	OOOO noss what did i do now (Preview) wel i was looken under my hood, and i musta hit the starter selnoid with something it tried to crank luckly my batterys dead, it jerked a lil. did seem like anything damage got done like me geting ran over. but now my shift well come out of gear like my clutch is ingaged all the time, it take no effort to shift...	jgt8229	20	1033	Feb 13, 2009 by nacanitihs
	Opinions? (Preview) I'm trying to figure out what will work good with my set up. I accumilated a few parts that Im putting on this Spring. I've found an original upper and lower Cobra manifold. 70mm tb, 24lb injectors 73mm meter calibrated for 24lb, and shorty bbk headers. I'm hoping to somehow gather up some money for a cam...	sem76	1	544	Feb 11, 2009 by 93_REEF_NOTCH
	Remote Start - brands and intall qs (Preview) So I want to put a remote start in my del sol. I've always done Vipers in the past, I know they're good but they're also pricey and I don't have a whole lot of extra cash right now. Does anyone know anything about the Python 1400s/what they usually go for? Also I am awful at wiring stuff, like really awful....	Phoenixx	9	627	Feb 2, 2009 by Phoenixx
	Suspenson kits (Preview) Sorry Posted in the wrong section, please see post in the "Suspension Thread" -- Edited by mustang50lx88 at 16:58, 2009-02-02	mustang50lx88	0	488	Feb 2, 2009 by mustang50lx88
	130 Amp Alternator? UDP's and Subs.... (Preview) So my question is will i need a better alternator now that I have under drive pullies? its a 94 5.0 motor, cobra upper/lower, gt40 heads, b303, 24lb injectors, 93 cobra mass air, msd6al, a/c delete, smog delete. I run subs in my car since its my daily driver. I never really had a problem other than dimming...	boostd710	28	927	Jan 20, 2009 by MRicci
	94 GT Motor (Preview) does neone have any info on the 94 Gt Motor? why it has less horse power than the my 90 GT? how it is when adding a E303 cam or ne cam? wat cam would u put in? how are the pistons? How are the heads and what kind? I'm asking these questions, cuz i got my first mustang and ima buy a 94 Gt Motor to swap in c...	junior611	12	740	Jan 10, 2009 by Mineral 02
	car wont start (Preview) ok so i finaly finish the head gaskets on my 5.0. got everything togthere its cranking like it wants to start but wont ingnite. any sudjustions , im dien to get my ccar back	jgt8229	9	747	Dec 15, 2008 by jgt8229
	service manuals ALL OF THEM (Preview) http://search.ebscohost.com/login.aspx?authtype=url%2cuid	bleed blue	8	723	Dec 12, 2008 by Turbo89
	Storing a short block (Preview) trying to see the best way to store a short block ...the 89gt im parting out has a nice short block and if no 1 buys it in next couple of days i want to keep it till spring ....its sitting in the car still with no heads on it under a car cover but i want to see what the best way of keeping it fresh would be ...	T76 Cobra	4	579	Dec 6, 2008 by 93 LX FiveO
	Nitrous Advice?? ANYONE?? (Preview) Alright guys whatsup, heres what im thinking, i really want to put a nitrous kit in my car (jims oldcar) what do you think would be the best kit for the car... not looking for nothing crazy and not much experiance with nitrous so im just trying to get into it.... im getting a kit either way so a little advice...	5p0inToH	10	771	Nov 28, 2008 by RALFRIZZO
	serpentine belt ??... (Preview) well i have a/c delete (the one that moves the p/s pump up) and no smog pump, i had the right size belt but i switched my alt. pulley back to stock because it wasnt charging enough, now my belt is just a bit long, so i have stock pulleys on my alt. and p/s pump, and aftermarket on my water pump and c/s, anyone kno...	supertukes	7	698	Nov 6, 2008 by 5 oh
	4 cylinder conversion question (Preview) ok I just spent the last 2 days completely converting a 91 convertible 4 cylinder auto to an 88 5.0 with 5spd. my question is the pink with black wire for the fuel pump is not getting power to turn the pump on. I can manually put power to that wire with my power probe and the car runs. I know the 4cylinder har...	Pitbull11	5	723	Nov 5, 2008 by Pitbull11
	well ive got a problem (Preview) my truck a 1998 f 150 4.6 has been a good truck re3cently the water pump went i put a new water pump in it and now it seems to be getting to much pressure as soon as it warms up it sprays out of the resavor any help would be great	droptopfox	4	650	Nov 4, 2008 by Mineral 02
	anyone w upr control arm? (Preview) ive got the prostreet upper and lowers on my car and when i installed them i noticed the uppers were about a 1/4" shorter than the stock ones. it messed w my pinion angle and now it vibrates. the car is lowered 2" too. didnt know if anyone else has ran into this or atleast noticed that the uppers w...	Silver GT	3	582	Nov 2, 2008 by Silver GT
	winter is here need help (Preview) ok i need some help or ideas from every one , , ok car is getting put on jack stand's and get covered . i know i have a few odds and ends to make meet on the car . i want to go to a carb set up but my problem is that i do know if i want the biggest big block stroker long block they make or do i do a 331 or 347 stroker , by the ti...	janandjaiden	11	601	Oct 29, 2008 by bonzcnc
	changing heads (Preview) is it possible to swap heads with out dropping the motor also i will be putting in studs so is there enough clearance to do so	bleed blue	1	565	Oct 28, 2008 by RALFRIZZO
	wanted to buy a good clutch (Preview) hi guys im in the look for a stage 2 clutch, can i put that on my stock 302 motor i just want a clutch that by letting the clutch pedal go a little the car spins rubber, i have a 90 fox 302 motor with aftermarket pulleys an an intake, can i do a stage 2 or 3 on it thanks.	stang1990	12	651	Oct 28, 2008 by sean86gt
	single turbo (Preview) is this turbo big enough 2 run a single setup off of?	luke	12	674	Oct 25, 2008 by T76 Cobra
	Charging a 16 volt battery (Preview) I have dual 16 volt batteries and I am currently running a Powermaster XS Volt Alternator. I think one of my batteries dead and caused my alternator to work over time. I have to check tomorrow but I am sure the adjustable regulator over heated and craped out. I have a 12 Volt alternator that I can put in the...	LX546	2	503	Oct 23, 2008 by LX546
	Mustang 2001 through 2004 Pushbutton Engine Start Modification (Preview) Mustang 2001 through 2004 Pushbutton Engine Start Modification	wheels	1	658	Oct 23, 2008 by bleed blue
	1996–2004 4.6L 2V Throttle Body & Plenum Flow Results (maximum flow in CFM) (Preview) 19962004 4.6L 2V Throttle Body & Plenum Flow Results (maximum flow in CFM) MAKES A GOOD POINT	wheels	0	593	Oct 23, 2008 by wheels
	need help with decodeing vin (Preview) on my id numbers on my drivers door i tried to decode it but no luck , ok let me explain when i got the mustang the guy told me it was a gt but it gets better i went to insure it it came up as a mustang gt / cobra gt , the color of the car is reefblue that only the cobras came with in 1993 and other things on this car point...	janandjaiden	5	623	Oct 22, 2008 by janandjaiden
	MUSTANG PARTS FOR SALE CHEAP REBUILT TRANS AND OTHER STUFF (Preview) 1993 COBRA DRIVERS DOOR MINT CONDITION NEEDS DOOR HANDLE HAS GLASS $100 1993 COBRA REAR BLACK TWEED SEAT $150 VERY NICE 2 NITTO DRAG RADIAL TIRES 245/45/17 GOOD FOR MAYBE 1 DAY AT THE TRACK THEY ARE LOW IN TREAD $25 2 235/40/18 NEXEN TIRES %50-60 TREAD $40 1995 GT AUTO TRANS JUST REBUILT WITH SHI...	snakebite	6	643	Oct 22, 2008 by snakebite
	amount of boost (Preview) dose anyone know what is a safr or max amount of boost yu can blow threw a stock internal 04	bleed blue	6	656	Oct 21, 2008 by janandjaiden
	tps problem (Preview) well it never acted up before but now i have installed a throttle body and plenum and keep getting a tps code is there a certai way to put that back on please HELP	bleed blue	11	677	Oct 21, 2008 by janandjaiden
	fuel pressure,pulse ad spark but no start any ideas? (Preview) getting prety sick of this shit with my car i reset the car at top dead center i have spark 45psi of fuel pressure and injector pulse but it wont start im thinkin it might be my pcm anyone have any ideas?	93fox	9	593	Oct 18, 2008 by 93fox
	buy/borrow Timing Pointer for 86GT ASAP for meet on SUNDAY!! (Preview) Does anyone have a timing pointer for an 86 GT 5.0?? My buddy's motor doesnt have one and he has been driving it timed by ear only for a couple years now. Well Im trying to get him to drive sunday for the meet so I can go finally and he said he'll go if he can get his car timed... Recently its acting like its flo...	boostd710	5	589	Oct 18, 2008 by LX546
	fox brakes... (Preview) whats needed to swap brakes from a v8 car to 4cyl? my car was orig. 4cyl and im looking into doing the brakes, i kno spindles/calipers and pads/rotors.....anything else?	supertukes	3	588	Oct 14, 2008 by GTStang
	Radiator inlet (Preview) I have run into a problem installing my new radiator and turbo setup. The problem is that the inlet to the rad is very close to the outlet of the turbo and the exhaust. I don't see anyway I could have a hose connected to the inlet without it being severely kinked or damaged from heat. This is a universal rad...	Mustswang	12	1024	Oct 13, 2008 by 93fox
	my fox hesitated when taking off (help) (Preview) hi guys i have a 1990 mustang 5.0 and its my fathers and the guy we bought it from said he play with the timing so is at 14 but i drive the car and if i rev it to shift it hesitated and looses power and a small explosion comes out and power comes back can anybody tell me whats that i dont now much about mustang but i w...	stang1990	10	573	Oct 11, 2008 by sem76
	What does everyone think of these rotors and pads? (Preview) I need to do the brakes on my car, what does everyone think of this deal from Summit? Rotors and Pads -- Edited by rbaxter85 at 20:23, 2008-10-09 -- Edited by rbaxter85 at 20:26, 2...	rbaxter85	7	808	Oct 9, 2008 by rbaxter85
	Bad News (Preview) i dont know how this happened on my F150.	mikefheath87	22	909	Oct 9, 2008 by luke
	Bolt Pattern? (Preview) tried finding info online but no luck...trying to find the wheel bolt pattern for a 93 bronco	The Sticker Guy	2	518	Oct 8, 2008 by The Sticker Guy
	EVERYONE LOOK... potential 86 trade BUT..... (Preview) http://westernmass.craigslist.org/cto/854316979.html.	boostd710	7	629	Oct 5, 2008 by boostd710
«First < 1 2 3 4 5 6 … 8 > Last» \| Page of 8 sorted by