Is there anyone that can sperate 4 tires from some rims for me...either free or real cheap? im selling the wheels and the guy doesnt want the tires...any help would be greatly appreciated...thanks guys
bought same kit for my 5.0 nx says ratings are at rwhp but this gain this guy states is crazy thats as much as an s trim what u guys think mine will be in soon a 150 shot and a dez tune and we will have to see my #s
Price Paid: $553.00 from Racenet.net
Year / Model Reviewed:
2000 mustang gt/NX stage 1-wet
...
i need a vortech blower
preferably s trim
just need head unit, no brackets or accessories
also need blower pulley and posssibly fmu
let me know what you guys have
thanks!
im just wondering wat you guys use when puttin an intake on for the gasket on the valley of the motor front and back. it comes with a cork gasket but i heard some people use rtv or other sealants. also do you have to run a pcv valve if you have breathers on both valve covers? any info is aprecitated p.s i cant sp...
The rears fit fine with the 5-lug swap kit,but the fronts are the ffrp 5-lug swap kit with the lincoln rotors...as they supposedly are...and the wheels fit like ass and even ended up warping one of them because I tried to snug them up and it might have ruined it...I'm not sure but some help here would be ap...
Good to see the following of Stangs...I met Jim at a show in Stoughton...seemed like a great guy and talked to him for a while...will be bringing all of my Stang friends to the site...good luck with everything and hope to catch up to you guys at some of the meets!
I just noticed the other day that I'm leaking tranny fluid from where the speedo gear connects to the tranny. It's not too severe of a leak but has a slow leak from there.. What should I do to fix that? Please Help, thanks to those who reply.
1898 GT, sunroof, paint is still in surprisingly good shape...but the car has been sitting for 4 years...i know the owner...dno what hes thinking...but someone backed into the front marker light as you can see...shot out a 1/4 window with a BB gun...inside is gettin moldy from a leaking sunroof...h...
This is a genuine Steve Irwin-style "Crikey!" moment. Despite taking a sales-chart beating from snapping-jawed archrival Holden, Ford Australia has rolled out a new Falcon family, the FG series. Among the seven-model range are a couple of turbo-powered tear-aways. V-8-quick, swee...
i got 21, 33, 41, 91, 94, and a couple more i cant remember
21 is ect out of range (car was cold during test)
33 is egr not opening
41 is HEGO something, running too lean??
91 is fuel pump secondary circuit failure to pcm.. wtf does that mean?
94 is air thermactor not functional (stupid smog shit)
a...
Yo what's up everyone my name's mike. I was here for the start but haven't posted anything. I got a 91 GT with a 331 it's off the road right now but it will be back after the winter. Well i just wanted to say WHAT'S UP and hopefully i will be their for the next meet lata.
it's a litte lean at the hit , shows in the TQ and A/F ..once i get it tuned should be good for another 15-20 rwhp -- Edited by 331strokerstang at 07:47, 2008-04-28
my intake hits my hood. that makes me mad. id like something that looks clean....less than 3 inches or i cant see over it. i dont care if it needs work i can fix it. thanks
need help with cam choice
steeda 19
trik flow stage 1
anderson n41
fcam
in a 90 lx stock shortblock
soon to have new heads and intake doing the swap at same time
i heard alphabet cams suck and were good in 1990
but please help and what sounds great also gotta have a little rumble lol
Alright im down in the south shore and need to get my tint done soon, but need some recommendations on where to go. I've had people tell me certain places dont do old cars like my 85 for warranty reasons, so if anyone knows where i should go or has had good luck with someone let me know. Thanks.
So as my 90 Hatch was in the shop for head gaskets, my mechanic noticed that my frame by my strut towers is rotting out and he refuses to put my motor back together until my car gets welded up... Now i have called so many autobody shops as well as welders and they all say "I cant help you." So now I am...
Well, after several hours of ripping my hair out trying to figure out the right combo and thanks to my dad and his machine working abilities, we've got it. About 3 hours worth of machine work and countless hours of labor. All thats left is new adapter fitings for the new calipers and the e-brake cables. I...
Damnit. State cop, 80 in a 65 on 190.
What sucks is I was cruising with traffic and got behind someone going way slow and as soon as switched lanes and accelerated to pass, the cop was parked on the damn shoulder. I switched back and of course he got behind me and lights came on. I seriously doubt I was goin...
Here's the story....I'm pulling the stock long block out of my 93 and swapping a 347 in there. I plan on transplanting the blower too. My goal is about 475rwhp
Right now I'm mapping out what I'm going to need to get the entire bottom end complete...everything minus heads, intake, fuel rails/injecto...
just put a kenwood dnx7120 in the stang.
All-in-One Navigation/DVD Entertainment System with 6.95 Reverse Tilt Touchscreen and USB/iPod Direct Control
The DNX7120 is an extraordinary All-in-One in-dash system wit...
Well thought I would share my dyno sheet. My mods consist of Aluminum drive shaft, CAI, 75mm/TB/Plenum, Steeda pullies, Stewart water pump, o/r x-pipes, weld in flows 44's, 4.10's and I believe thats it for the performance aspect, well whadda ya think?
[img]http://img169.imageshack.us/img16...
I have an 88 Mustang 5.0 and I'm in need of replacing my front wheel bearings, I know where there located but have never done this kind of job before, and was wondering if anyone has experience with doing them, and could give me some info on the subject, such as, what tools are required and what steps I shou...
whats up guys, I am a non mustang owner here. But if I had to choose between the Chevy or the ford I would be a ford man. LOL actually I have few friends with mustangs and non which are internet savvy.
My car is a 1988 Nissan 300ZX Turbo, It is a Shiro Special that nissan released. We know of about 218 registe...
seal blew out of the steering box, fixed that, now the cap keeps blowin off the pump, brand new lines so those arent causing any extra pressure, any ideas? pump junk probably?
its a 6cyl 2wd
I just bought a New Speedo Gear Retaing Clip.. cuz mine was missing apparently, so I bought a new one... Now I'm having a problem as to where it goes exactly... can anyone show me a pic or something and help me out... It's probably easy but just want to make sure its going in the right spot... here is a pic of t...
going to nitrous express plate wet kit looks to be best on market opinions welcome please new never used it was told tuned right no worse than supercharger or turbo if tuned right and was told stock short block 90 lx hatch 100-150 shot and last but allways wanted to no how freakin hard does this stuff hit a...
Hello guys, I am not a mustang guy but have friends and Know guys who own mustangs.I used to work at New England Dyno.
I bring news to you about the recent changes that got passed for Massachusetts state emissions.
All vehicles get a safety check.
1984 and newer diesel vehicles will get an opacity...
Ford Motor Company announced today it has built its 9 millionth Mustang. The GT Convertible Mustang is heading west to be delivered to a dealership in Iowa.
The Ford Mustang, approaching its 45th anniversary on April 17th, 2009, is one of the most widely recognized vehicles in the world. Today, on...
Hi,
Just moved here from Texas. Passed TX Inspection with no issues including on emissions. My vehicle here is "not ready" for an inspection after 2 visits and extensive driving in between. No check engine codes, no illegal exhaust components... I have a big "R" inspection...
PATS TOWING!!!!! Me Jim and Wheels went to pick up Jims new notch with wheels' AAA...everything was set...plate on the car...good to go...then dickface tow truck driver shows up...nevermind his shitbag attitude...but how bout he rolls up with 2 cops...pretty much accusing us of trying to steal th...
My fucking water heater shit the bed tonight...
It's covered under warranty, but the building's plumber says $500 to install....
I think that is a crock of shit.
Anyone know a good plumber in the area that can do it cheaper?
Thanks.
well thats what i'm thinking about putting in mine but people have been telling me that jl is overated. is this true? remember others say jl is the best.