Just bought a mint 1986 GT that I'm in love with haha...Almost all original, car is close to perfect. I'll post some pics up this Saturday when I pick the car up. I will be doing a major swap of everything in my notch to the 86, and vice versa...My notch will be up for sale in a couple months either as a roller o...
Is it true that longtube headers will bottom out and scrape the ground on fox bodies? I have heard stories of this happening but have also heard that this is completely false. And the car is an '86 GT at factory ride height.
just started out as changing gaskets then moved on to boring and blueprinting stroking it out to a 347 ford xcam,trickflow twisted wedge heads,trickflow upper/lower intake manifold,1.60.1 roller rockers,ford racing gear and chain timing chain,73mm mass air setup, 75 mm throttlebody, 30 # inje...
i did cobra upper and lower intake and bigger throttle body and my timming light says 17 degreees advanced. which i know must be to far consider stock timming is 10degrees, now i didnt mark the distributor comming out but i timmed it brought number 1 up the whole deal and expecially when its cold it pops o...
Lookin for a 5 speed transmission, dont really give a fuck what it is or what its out of. mine doesnt have 3rd gear and i wanna line em up on april 2nd for street night. so throw em at me and let me see what you got cause i need this soon.
So i have been having problems with my car hesitating and stumbling when i try to excelerate. My car is a 1990 hatch thats powerdyne supercharged (rebuilt 8psi), 70mm throttle body, 42lb injectors, 255lph fuel pump and a 80mm Pro-M mass air and filter that is on the end of the cold air tube that runs into...
Hey everyone, My name is Jay and im from worcester mass. My car is a White 1990 GT hatch. Its a 5.0 with a Powerdyne Supercharger (Rebuilt 8psi), 42lb injectors, 255lph fuel pump, 70mm throttle body, 80mm mass air, Cobra upper and lower intake, GT40 heads, MSD 6AL ignition box, BBK shorty headers, BBK o...
So yes the title says it, I've fallen off the face of the internet for a bit. I've been having a lot of issues with it which make browsing incredibly slow :/ So I haven't been on. But hopefully they will be fixed soon :)
Took the stang out, just around the block, the other day :) It was just too gorgeous not t...
havent posted the mods to my car yet so heres what i got for now. flowmasters with hollowed h-pipe, headman headers, 3:73s, welded sub frame connectors, 2 inch lowering springs adjustable rear control arms, B cam, edelbrock performer intake, msd ignition. probably forgetting some stuff nothing i...
Ok...first off I know this isn't the place to post this but seems close enough to it though. There is my question and I don't know if any of you guys have done this. I am looking for a place who does custom works for interior. Just wondering if anyone here would recommend a place. To be honest, I am VERY picky...
I'll be in canda in a few hours and staying for 4 days.... Have fun in new england i'm going to be freezing my ass off. Have fun guys lol i know I will be
I have Zenetti 20" - they fit perfect on the back of my '07, but rub the front. I want to get them machined so they will fit, but I don't know the outside dimensions of the front wheel hub - does anyone have any suggestions???
So today i realized my tranny was having problems shifting into third, it would get up to 6400 rpm without shifting, so i asked my brother to check it out. My brother jumps in and takes my car for a whip down 107, all of a sudden two idiots with no lights on slammm on there brakes infront of us to line them up [i...
Guys,
I had called MPE racing and was told it is $500 to dyno tune my car which to me is a little high for a dyno tune. Are these guys really good with tuning or are we talking a 20yr old with a labtop who thinks he can tune a Ford ECM.
Comments wanted about this shop and there tuning!
Thanks
Mike
Sunday UnitedStangs is having a meet at the Emerald Square Mall in Attleboro right off 95...me...Jim...Tim...Kenny...Matt and a few others are probly gonna show up for a bit...everyones meeting at Jims house before we go...it starts at 10am and theyre leaving for the cape around 11:15...anyone e...
Looking to buy 4-lug 15X9 Weld Draglites with 5.5" backspacing. Or trade for my 4-lug 15x8 Draglites with 4.5" backspacing. -- Edited by bonzcnc at 07:04, 2008-03-17
just picked up an 88 with a 93 motor ...the car hasn't run in a while when i push in the clutch going bout 20 the car wants to die,or the rpms dive down and back up and almost stalls,is this timing or bad fuel, any suggestions????
how do you know is a pair of heads are 351's? on cl they have 351 fordmotorsport heads for 300. but i dont know how to tell. are 351 heads worthy of being on my 306? or should i look elsewhere.
Hay guys... I am relativly new to your site here, I am having a good time and everyone seems prety cool. I also belong to ModdedMustangs.com but there are not to many guys from NE on there. I posted on Craigs list last year about a great place for a bunch of us to gather and hang out in the Bellingham, Mass are...
It's that time of the month again....er...um... for nominating April Ride of the Month.
Let the nomiations begin...please refer to Rules thread for any questions......No drama please..
YOU CAN NOT NOMINATE YOUR SELF....................
Nominations will run till mid month, then a Poll w...
in the process of putting my 306 back together fuel injected. i need a 1990 dash harness, upper lower intake would prefer track heat, edelbrock performer, holley... throttle body 70+, mass air for 24lb injectors - 32lb, and fuel rails.... kinda looking for a package deal let me know what you got
than...
Does anyone know what color the excite wire is running to the alt? I already have gauge running from my kill switch to the power distribution block.... but I need to kill the alt to pass tech.
I'm looking for cobra rims (and tires) again after blowing my opportunity w/ 331stroker so if anyone knows someone thats willing to sell (or trade) their cobras for my pony's + cash or just straight cash let me know. Thanks. -- Edited by SPDoherty at 11:18, 2008-03-09
my name is andy i live in oxford, ma i'm building an 88 notch, 306, edelbrock cam, air gap intake, holley double pumper 650, 373's and a t-5. was an auto 4 banger to begin with. 10 point cage. this is also the first car i am building.
Well just got my wheels...theyre on but 11:30 pm doesnt permit for good pics...ill be gettin some tomorrow once theyre tight and the car's on the ground...heres the last of the cobras... MY CAR...
looking for a bolt on cowl hood thats good to be put on could need little work , dont care about color or scrathes and shit like that, size doesn't matter, this is for a 1990 notch
New rotors/hubs, calipers, pads, inner and outer wheel bearings, wheel seals, the whole sha-bang. Took more time to find the right parts, me not knowing where the 5 lug conversion came from, then it actually did to install.
Next weeks project: rear disc brakes. Already have the rotors for it, just n...
I DONT WANT ANYONE MAKING BOSTONSTANGS STICKERS.IF YOU WANT THEM ASK ME. IF I SEE ANYONE WITH ANY THAT I DIDNT MAKE YOUR PAYING ME FOR THEM
???????????????????? whats the difference??? its promoting the club getting our name out there more & more as long as they look the same and the same style a...
