BOSTONSTANGS.COM

Members Login
Username 
 
Password 
    Remember Me  
http://bostonstangs.com/ -> BOSTONSTANGS.COM -> Tech Forums -> LOOKING FOR SOME 5.0 KNOWLEDGE I KNOW SOMEONE ON HERE CAN HELP ME
Post Info TOPIC: LOOKING FOR SOME 5.0 KNOWLEDGE I KNOW SOMEONE ON HERE CAN HELP ME
snakebite


Status: Offline
Posts: 2503
Date:
LOOKING FOR SOME 5.0 KNOWLEDGE I KNOW SOMEONE ON HERE CAN HELP ME
Permalink  

i have a clean 1986 2wd ranger 6 foot bed 4cyl 5 speed

i also have a rebuilt 93 5.0 bolted to a new t5 and new clutch

making motor mounts,exhaust,drive shaft ,fuel lines return lines that's all easy stuff for me

my question is has anybody on here ever made a mustang injection harness work in something other than a mustang (jeep,toyota truck,supra,ranger) and have any pointers or diagrams

i want the ranger 5.0 5 speed and fuel injected with a 95 lightning upper 24 lb injectors flat black sitting on bullits or 03 cobras i already have lightning seats and stuff like that

__________________
1993 cobra #2354 ( 1 of 362) ...04 lariat f350 crew cab diesal dually full 09 conversion...79 bronco 6.0 diesel conversion..more to come
91notchback


Status: Offline
Posts: 2325
Date:
Permalink  

good luck do you have the mustang fuel injection harness and computor?? if so run it like a mustang run all the wires plug them in and it should work

__________________
fox mustangs rule! mustang notch 4.6 4 valve
91notchback


Status: Offline
Posts: 2325
Date:
Permalink  

http://www.fordfuelinjection.com/?p=6
should help

__________________
fox mustangs rule! mustang notch 4.6 4 valve
Silver GT


Status: Offline
Posts: 193
Date:
Permalink  

I dont really have to much experiance with the 302 but i put a fuel injected 305 chevy in my 94 toyota and its reallly not that bad.

for the chevy it was only a few wires to make everything work like: constant power to the ecu, switched power to the ecu, and ground to the ecu where the main things.

Other things like check engine light, speed sensor are easy to figure out with manuals for both rigs. I even hooked up the data link connector so you could still pull codes with a scan tool!

I wouldnt think it would be too much differant with the ford. and it should be alot easier going from ford to ford, not chevy to toyota.

with wiring diagrams you can put a fuel injected motor in anything with a little time and research.

__________________
Cold air, 75mm TB, Plenum, Plenum spacer, diablo sport preditor, UPR SS, 2" Springs, spec stage 1 clutch, spec aluminum flywheel, upr pro street upper and lower rear control arms, 4:10 gears, Mac 2.5 catback, poly motor/trans mounts.....
MRicci


Status: Offline
Posts: 275
Date:
Permalink  

I just got home from work and have to head to sleep, Ill have to find it but i have a site that has all the wiring diagrams for mustangs for each year. I will look for it tonight.

__________________
South Shore Stangs
snakebite


Status: Offline
Posts: 2503
Date:
Permalink  

thanks guys

__________________
1993 cobra #2354 ( 1 of 362) ...04 lariat f350 crew cab diesal dually full 09 conversion...79 bronco 6.0 diesel conversion..more to come
sled


Status: Offline
Posts: 970
Date:
Permalink  

talk to ed he built his brother a 5.0 ranger

__________________
shiesta tim
snakebite


Status: Offline
Posts: 2503
Date:
Permalink  

talked to a guy that builds factory five race cars he is going to strip a 5.0 harness for me and give me a hand with it thanks for all the help

__________________
1993 cobra #2354 ( 1 of 362) ...04 lariat f350 crew cab diesal dually full 09 conversion...79 bronco 6.0 diesel conversion..more to come
MRicci


Status: Offline
Posts: 275
Date:
Permalink  

Here are the wiring diagrams for 88-93. Hope this helps too.

88-91 wiring diagram

91-93 wiring diagram

__________________
South Shore Stangs
jgt8229


Status: Offline
Posts: 489
Date:
Permalink  

snakebite wrote:

talked to a guy that builds factory five race cars he is going to strip a 5.0 harness for me and give me a hand with it thanks for all the help




hahah i was talken to that guy , i saw the wiring in his cobra , looks professinal

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
http://bostonstangs.com/ -> BOSTONSTANGS.COM -> Tech Forums -> LOOKING FOR SOME 5.0 KNOWLEDGE I KNOW SOMEONE ON HERE CAN HELP ME
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard