BOSTONSTANGS.COM

Members Login
Username 
 
Password 
    Remember Me  
http://bostonstangs.com/ -> BOSTONSTANGS.COM -> Tech Forums -> need help with front springs tires rubbing
Post Info TOPIC: need help with front springs tires rubbing
331strokerstang


Status: Offline
Posts: 1347
Date:
need help with front springs tires rubbing
Permalink  

i have motorsport 'B" Springs in my car and it sit too low in the front and the tires rub
i need to raise the car atleast 7/8 to get it even with the rear and that would help the rubbing
i've already roll the lips on the fenders ...it helped but still rubs ,,,any sugestions on springs i could use,
and coilovers are out of the question the tire/rim is already 1/8 away from the strut on the inside no way they would fit in there ,
and ...DON'T SAY PUT A SMALLER TIRE thats just stupid my wheels and tires are brand new and thats what i'm using ..was thinking of using a stock spring and cutting a half a coil out at a time until i get the ride height i need b/c "B" springs are the same spring rate as a stocker just shorter , but if you've done springs on a mustang they suck more then life and you only want to do them once ...thanks



needs to be at 26 5/8's





-- Edited by 331strokerstang at 20:43, 2008-04-02

-- Edited by 331strokerstang at 20:43, 2008-04-02

__________________
91 Mustang lx Hatch 6.0 LSX
94bronco


Status: Offline
Posts: 152
Date:
Permalink  

Bullit springs should do the trick

__________________
91 Notch 70mm BBK, 76mm C&L, FMS 3.73's, Rear Control arms, Cobra R's, BBK headers, O/R H pipe,Flowmasters, Subframes, Jamex springs, MM camber plates, Underdrives 94 Bronco, 5.8 , Dual exhaust with 40 series, 6 inch skyjacker, 4.56's
331strokerstang


Status: Offline
Posts: 1347
Date:
Permalink  

94bronco wrote:

Bullit springs should do the trick





yea i just read that on corral ..thanks ..now just need to find a set

__________________
91 Mustang lx Hatch 6.0 LSX
94bronco


Status: Offline
Posts: 152
Date:
Permalink  

Yea I just bought a set off my freind but I am not sure where else you can find them anymore

__________________
91 Notch 70mm BBK, 76mm C&L, FMS 3.73's, Rear Control arms, Cobra R's, BBK headers, O/R H pipe,Flowmasters, Subframes, Jamex springs, MM camber plates, Underdrives 94 Bronco, 5.8 , Dual exhaust with 40 series, 6 inch skyjacker, 4.56's
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
http://bostonstangs.com/ -> BOSTONSTANGS.COM -> Tech Forums -> need help with front springs tires rubbing
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard