BOSTONSTANGS.COM

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 5 lug conversion


Status: Offline
Posts: 483
Date:
5 lug conversion


will the Mark VII spindles work or just the rotors?

__________________
1991 Red Fire LX 1997 F350


Status: Offline
Posts: 204
Date:

Those rotors should work with your current spindles...



__________________
89 LX. Maximum Motorsports AutoX toy.


Status: Offline
Posts: 919
Date:

rotors will DEFINATLEY work, off an 89-90 lincol mark 7, w. out abd or w abs.....w.out abs is a cheaper rotor but parts stores usaly stock ones w abs....doesnt matter u can just rip the inner ring off the rotor anyway, hope this helps....moser sells a nice set of axles for 235$ too, 1200hp worthy, and 9 inch drums off a 80's or early 90s ranger, unless ur goin disc....by the way my buddy has a built 8.8 w. 4.10's and 5 lug disc break set up complete for like 400$


__________________
"Nothing says "I LOVE YOU HONEY" like a smack across the dome with a camshaft" -G.M.


Status: Offline
Posts: 483
Date:

what i saying is i need to run the 94-95 spindles for the 03 cobras so will those spindles work in place of the 94-95 ones? thanks for the offer frank but i don't really have much money right now to spend on a rear end and I'm not running rear disc but thanks anyways.

__________________
1991 Red Fire LX 1997 F350


Status: Offline
Posts: 616
Date:

Big Frank wrote:

rotors will DEFINATLEY work, off an 89-90 lincol mark 7, w. out abd or w abs.....w.out abs is a cheaper rotor but parts stores usaly stock ones w abs....doesnt matter u can just rip the inner ring off the rotor anyway, hope this helps....moser sells a nice set of axles for 235$ too, 1200hp worthy, and 9 inch drums off a 80's or early 90s ranger, unless ur goin disc....by the way my buddy has a built 8.8 w. 4.10's and 5 lug disc break set up complete for like 400$






I might be interested in that 8.8 with the discs!

__________________
89 GT 306,Vortech SC-Trim,GT40P heads,Cobra Intake,65mm FRPP TB, 42lb Injectors,PMAS MAF,190lph pump,E303,Crane Adj. 1.6 RR's,FRPP Headers,Pype's X-Pipe,Magnaflow cat-back,Spec Stg II Clutch,Tremec 3550 w/Pro 5.0 shifter,FRPP Alum. Driveshaft,3.55's.


Status: Offline
Posts: 616
Date:

5 oh wrote:

what i saying is i need to run the 94-95 spindles for the 03 cobras so will those spindles work in place of the 94-95 ones? thanks for the offer frank but i don't really have much money right now to spend on a rear end and I'm not running rear disc but thanks anyways.






I have a pair of 5 lug drums if you are interested for the rear. I am not sure the 03 Cobra rims will clear the dustcap on those rotors.


-- Edited by 89Rustang at 23:20, 2007-07-23

__________________
89 GT 306,Vortech SC-Trim,GT40P heads,Cobra Intake,65mm FRPP TB, 42lb Injectors,PMAS MAF,190lph pump,E303,Crane Adj. 1.6 RR's,FRPP Headers,Pype's X-Pipe,Magnaflow cat-back,Spec Stg II Clutch,Tremec 3550 w/Pro 5.0 shifter,FRPP Alum. Driveshaft,3.55's.


Status: Offline
Posts: 204
Date:

Those rotors will not work with 03 cobras. You need to get the SN95 spindles & rotors...

Read www.sn95brakes.com ...

Trust me on this one. Read this a few times... and then ask questions from it. It is one of the best site for this conversion, if not the best.

Good luck.

__________________
89 LX. Maximum Motorsports AutoX toy.


Status: Offline
Posts: 483
Date:

ok ill do the sn-95 conversion and rustang i would be interested in those drums what kind of condition are they in? how much?

__________________
1991 Red Fire LX 1997 F350
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard