BOSTONSTANGS.COM

Foureyes89 · Foureyes89

I Have a 351 Windsor that I plan to have made into a 408 in the future. I came across 2 transmissions, c4 and a c6 both for short money! What would be better to put behind a 408. We'll say NA for now maybe a turbo or something later on down the road. Any and all opinions would be appreciated

stangabanga · stangabanga

Went to install my Hurst boot plate today with no luck. for some reason my shifter is about an inch too far to the passenger side of the car to fit into the plate opening. i recently installed a ford racing cross member with the Energy Suspension bushings, everything looks correct. The crossmember can o...

dunny077 · dunny077

I'm pretty sure the tranny in my car needs to be replaced, the shifter rattles like crazy at higher rpm (anything above 4500, and above 5000 is unbearable). Its not the shifter because I have swapped it out with a stock one and it does the same thing. I've tried replacing the fluid, tightening up shifter...

wheels · wheels

has anyone ever worked on a tr3650 before my tr3650 grinds going into 2nd at rpms over 2500 just wondering if anyone has taken one apart before

Stags89stang · Stags89stang

t-5 thats in the 2.3 turbo cars same as t-5 in v-8 cars?? i thought they were diff but not sure.....ne1 know?? thanks

NotchenHeimer · NotchenHeimer

So every now and then ill be cruisen and when i go into second and release the clutch it will sometimes kick me out of gear, never has happend at speeds more then about 20mph, thats one...2nd coming out of first at high rpms (4-5k) will grind second every time...and coming out of second at high rpms, SOMET...

Justin89TT · Justin89TT

anyone here know how to rebuild a t5? or know of a good place to get it done?

Stags89stang · Stags89stang

so i pulled the junk t-5 outa my 91 last night. everything came out nice and smooth. got the trans on the floor and noticed some damage on the input shaft. so i peek in through the bellhousing and uh oh theres pieces of pilot bearing everywhere. i wasn't happy so then i pull down the bellhousing and clutch f...

droptopfox · droptopfox

im alittle scared about pulling mine nothing will fall out when i un bolt them is there any tricks or tips anything that can got wrong

loopy · loopy

looking to get a better shifter i had a pro 50 shifter in my old car and it was nice what has anyone else used thanks

droptopfox · droptopfox

im getting a deal on a tci street fighter manual/auto valve body for an aod just wondering anyone have experances with them and whats the shift pattern with the manual/auto valve body

wild88stang · wild88stang

My step sister just bought a 90 Fox GT....I saw it yesterday for the first time and the Tranny whines really bad. Or it sounds like an airplane in and outside fox while it is driving. I am going to change fluid next weekend Any suggestions or Fixes??? George almost forgot it has an aftermarket shif...

fast2000mustanggt · fast2000mustanggt

so i have a 96 cobra with a 97 motor just took out the original t45 has 185k and installed a built tr3650 and my speedometer is all crazy when im doing 50 according to my gps my speedo goes all the way back around to . what causes this and how can i fix it

LX546 · LX546

Rockland Standard Gear (RSG) has just added to its Tranzilla line-up of brutally strong 6-speed manual transmissions with an easy, and much-needed upgrade for Tremec TKO500 and TKO600 5-speed transmissions. RSGs new Tranzilla High RPM Synchro Rings solve a traditional high rpm balky shift prob...

90LX · 90LX

Just looking to see what my options are, I need to buy a tranny for my 1990 fox body. Want to keep it a 5-speed but need something that will hold some potential power. Will be bolting it up to a Ford Racing 392

1979slowstang · 1979slowstang

How hard is it to swap in a 5 speed? what do I need besides the obvious? Do I have to swap computers? It's an 87 Notch.

wheels · wheels

missed a second gear shift yesterday now if i shift above 2k rpm it grinds... anything below there is no problem once its in gear no problems all other gears work fine i checked cable seems to be fine what is wrong any ideas????

jgt8229 · jgt8229

ok so my engines goin in in the next day or 2. i was gona throw a clutch in there too. i was wondering what would be a good one for a daily driver. car is basicaly stock, planing on doin gt40 heads and intake in a couple mounths. was wondering whats a good package to use, i was thinken i mite as well replacing eve...

stang1990 · stang1990

i bought a triple quadrant kit cable for my fathers car and intall everything, bought a stage 2 king cobra clutch but i dont know if i intall the quadrant right i didnt come with instructions (lol) i drove it and it shift good but i doesnt feel like a stage 2 should grab but i want to know if anybody has instal...

stang1990 · stang1990

hi guys my father in law has a 1990 mustang 5.0 5 speed and we change the clutch on it but a lot of fluid came out of the tranny nothing you can do about that but i want to know what type of fluid i put back in everybody has some different to say well i hope somebody can help me so i can put back in the road thanks.

91notchback · 91notchback

is there any difference between the two? which would be better for a 700hp at the motor street/strip car?

Rob · Rob

Anyone know the torque specs on a 97 cobra 4.6 flywheel and clutch assembly?? thanx for any help...

91notchback · 91notchback

what transmission should i use for my mustang? i want to have a street car with about 500 hp off of nitrous but with it on 700 hp im using a nine inch ford with 4:10s i want to know which is the best for a semi street car. a powerglide, an aod or a c4. please help me out -- Edited by 91notchback on Sunday 17th of May...

DMURB · DMURB

i have a tremec tko transmission in my car. i think the tranny mount is broken or worn out. is there a specific mount i need for tremec or can i use any tranny mount. thanks -- Edited by DMURB on Tuesday 19th of May 2009 04:40:55 PM

mikefheath87 · mikefheath87

Yanni5.0 · Yanni5.0

Hey guys wutsup..finally home after bein in Combat Trainin and Air Crew trainin for 6 months...Alright here is the lowdown..shift into 1st doesnt catch till clutch is almost all the way released..then grinds starting off then goes away....shift into second normal if i slightly give it gas it will g...

wheels · wheels

looking for clutch alignment tool for my stang need ASAP

droptopfox · droptopfox

fidanza clutches are they any good or junk what do you recommend

rbaxter85 · rbaxter85

Hey guys/gals wondering if any of you have driven a fox body with a MGW shifter in it and how you liked it? I have a 1992 Mustang GT with a Tremec 3550 in it. I was thinking of putting in an MGW. I have have driven an 04 Cobra with one and I really liked it. Any opinions?

boostd710 · boostd710

I have a Steeda Tri Ax shifter on my T5 now. Well I have always loved the look of the Hurst shifters. Reminds me of an old muscle car, as well as the hurst shifter I had in my old truck. My question is, if I order this hurst shifter stick, not the whole shifter assembly, just the stick, ball, and boot, will it bo...

fast2000mustanggt · fast2000mustanggt

question i have a t-45 in my 00 gt and im having a 5.1 modular stroker put in my car with cms/vt stage 3 blowers cams, and a p1 procharger... looking for 550 plus..... should i upgrade tranny and what to...?

wheels · wheels

blew my clutch into pieces tonight on the highway shifting into 4th racing a import need opinions on what clutch flywheel and throwout bearing i should get need it quick probally have to overnight it -- Edited by wheels at 20:32, 2008-09-23

Yanni5.0 · Yanni5.0

took the whip out for a ride today and noticed if i have the car in 2nd and slow down clutch depressed then if i slowly let the clutch out and give it some gas it grindsss till i get a good paste goin!!! ahhh gives me chills up the spine wen it does this

JIM · JIM

Does anyone know if the 88GT T5 Bearing retainer is different from the 94's? I have one from both and the 94 is longer and the part closest to where it bolts to the tranny is a wider piece for about 1 1/2. If you have this info please give me a call 508 406 1126

wheels · wheels

tranny is leaking out the back is that something i can fix let me know thanx WHEELS

andyss420 · andyss420

i have 2 borg warner tranny's i was told both are t-5's and was also told there both t-56's. anyone know how i tell what the hell i have. thanks

JIM · JIM

Astro Performance's A-Five Transmission

SPDoherty · SPDoherty

I went to mustangspecs.com and deciphered my vin and the codes inside in the door. So it turns out that the car was AOD even though the kid told me it came standard. But I learned little cool things about my car that I didn't know before. I don't why I'm posting this mostly because I'm bored but ahh yea I said...

wadman · wadman

i have a 95 i want to switch from auto to stick. i will rob every thing i can from my 86. but what will i need that is not in my 86. all i can think of is the clutch pedal setup. what am i missing that will not be the same? thanks

Big Frank · Big Frank

ya so the throw out bearing shit itself in my car, anything speical i shuld know about before i go replacing it?, im gonna throw a new bearing retainer on the tranny too...if the clutch looks ok, it will stay because i have no money and no job right now, just wondering if therres anthing special i gotta to t...

uatlb · uatlb

link will show all info and probbly anwser all your questions http://www.tccoa.com/articles/tranny/index.html#

uatlb · uatlb

http://www.vapauto.com/jmod.htm -- Edited by uatlb at 16:31, 2008-01-11

slyman · slyman

Hello and I know I haven't been around lately, just been busy. But I would like to ask some of the guru's out there about this question....... It is relating to a specific transmission that I am thinking about to use with the set up that I currently have "written" up. Yes, it will be a Fox Bo...

mb93gtconv · mb93gtconv

i am switching my 89 4cyl auto over to a five speed.in the local junk yard there are 2 88 4cyl mustangs and a turbo coupe t bird.i was wondering if there was any difference between the mustang 5 speed and the turbo coupes.if the birds is better then i will buy it.any suggestions are appreciated! mark

86gtTracey · 86gtTracey

I was wondering if i could get some suggestions from you guys and tell me what is a good tranny to buy. Its an 86 gt 5-speed.

JIM · JIM

T5 Tranny kits

JIM · JIM

Hey guys can i use gear oil in my T5 tranny or use tranny fluid

-- Edited by bostonstangs......jim at 11:14, 2007-03-18 -- Edited by bostonstangs......jim at 11:15, 2007-03-18

Topic		Started By	Replies	Views	Last Post
	c4 vs c6 (Preview) I Have a 351 Windsor that I plan to have made into a 408 in the future. I came across 2 transmissions, c4 and a c6 both for short money! What would be better to put behind a 408. We'll say NA for now maybe a turbo or something later on down the road. Any and all opinions would be appreciated	Foureyes89	0	4458	Dec 1, 2013 by Foureyes89
	HURST Boot plate with stick problems? (Preview) Went to install my Hurst boot plate today with no luck. for some reason my shifter is about an inch too far to the passenger side of the car to fit into the plate opening. i recently installed a ford racing cross member with the Energy Suspension bushings, everything looks correct. The crossmember can o...	stangabanga	1	2027	Sep 5, 2011 by wheels
	Need a T5 Rebuild..Where should I go? (Preview) I'm pretty sure the tranny in my car needs to be replaced, the shifter rattles like crazy at higher rpm (anything above 4500, and above 5000 is unbearable). Its not the shifter because I have swapped it out with a stock one and it does the same thing. I've tried replacing the fluid, tightening up shifter...	dunny077	2	2117	Aug 9, 2011 by T76 Cobra
	tr3650 rebuild/replace parts (Preview) has anyone ever worked on a tr3650 before my tr3650 grinds going into 2nd at rpms over 2500 just wondering if anyone has taken one apart before	wheels	2	2056	Jul 11, 2011 by DMC Jason
	5 spd behind 2.3 turbo (Preview) t-5 thats in the 2.3 turbo cars same as t-5 in v-8 cars?? i thought they were diff but not sure.....ne1 know?? thanks	Stags89stang	8	2897	Mar 29, 2011 by TG413
	A Few Problems I Need Help On (Preview) So every now and then ill be cruisen and when i go into second and release the clutch it will sometimes kick me out of gear, never has happend at speeds more then about 20mph, thats one...2nd coming out of first at high rpms (4-5k) will grind second every time...and coming out of second at high rpms, SOMET...	NotchenHeimer	6	2288	Sep 18, 2010 by NotchenHeimer
	t5 rebuilding (Preview) anyone here know how to rebuild a t5? or know of a good place to get it done?	Justin89TT	7	2198	Sep 3, 2010 by droptopfox
	need a good laugh?? pulled my t-5 last night (Preview) so i pulled the junk t-5 outa my 91 last night. everything came out nice and smooth. got the trans on the floor and noticed some damage on the input shaft. so i peek in through the bellhousing and uh oh theres pieces of pilot bearing everywhere. i wasn't happy so then i pull down the bellhousing and clutch f...	Stags89stang	1	2424	Jul 30, 2010 by Eightyfivefox
	aod valve body (Preview) im alittle scared about pulling mine nothing will fall out when i un bolt them is there any tricks or tips anything that can got wrong	droptopfox	0	1984	Jun 14, 2010 by droptopfox
	short shifter questions (Preview) looking to get a better shifter i had a pro 50 shifter in my old car and it was nice what has anyone else used thanks	loopy	9	2479	May 20, 2010 by SOB 86 CAPRI
	tci street fighter valve body (Preview) im getting a deal on a tci street fighter manual/auto valve body for an aod just wondering anyone have experances with them and whats the shift pattern with the manual/auto valve body	droptopfox	0	2743	May 18, 2010 by droptopfox
	Whining Tranny (Preview) My step sister just bought a 90 Fox GT....I saw it yesterday for the first time and the Tranny whines really bad. Or it sounds like an airplane in and outside fox while it is driving. I am going to change fluid next weekend Any suggestions or Fixes??? George almost forgot it has an aftermarket shif...	wild88stang	10	2725	May 17, 2010 by Eightyfivefox
	tr3650 (Preview) so i have a 96 cobra with a 97 motor just took out the original t45 has 185k and installed a built tr3650 and my speedometer is all crazy when im doing 50 according to my gps my speedo goes all the way back around to . what causes this and how can i fix it	fast2000mustanggt	0	1850	May 17, 2010 by fast2000mustanggt
	New TRANZILLA® TKO High RPM Carbon Fiber Lined Synchro Rings (Preview) Rockland Standard Gear (RSG) has just added to its Tranzilla line-up of brutally strong 6-speed manual transmissions with an easy, and much-needed upgrade for Tremec TKO500 and TKO600 5-speed transmissions. RSGs new Tranzilla High RPM Synchro Rings solve a traditional high rpm balky shift prob...	LX546	3	6502	May 16, 2010 by 91notchback
	transmission options (Preview) Just looking to see what my options are, I need to buy a tranny for my 1990 fox body. Want to keep it a 5-speed but need something that will hold some potential power. Will be bolting it up to a Ford Racing 392	90LX	4	2231	Jan 10, 2010 by 90LX
	5 Speed swap (Preview) How hard is it to swap in a 5 speed? what do I need besides the obvious? Do I have to swap computers? It's an 87 Notch.	1979slowstang	6	2445	Oct 10, 2009 by 93 LX FiveO
	tr3650 transmission (Preview) missed a second gear shift yesterday now if i shift above 2k rpm it grinds... anything below there is no problem once its in gear no problems all other gears work fine i checked cable seems to be fine what is wrong any ideas????	wheels	7	2424	Jul 28, 2009 by Mineral 02
	what clutch? (Preview) ok so my engines goin in in the next day or 2. i was gona throw a clutch in there too. i was wondering what would be a good one for a daily driver. car is basicaly stock, planing on doin gt40 heads and intake in a couple mounths. was wondering whats a good package to use, i was thinken i mite as well replacing eve...	jgt8229	24	3846	Jul 21, 2009 by wheels
	re:triple quadrant kit (Preview) i bought a triple quadrant kit cable for my fathers car and intall everything, bought a stage 2 king cobra clutch but i dont know if i intall the quadrant right i didnt come with instructions (lol) i drove it and it shift good but i doesnt feel like a stage 2 should grab but i want to know if anybody has instal...	stang1990	0	2046	Jul 19, 2009 by stang1990
	need help on what type of fluid for my t-5 (Preview) hi guys my father in law has a 1990 mustang 5.0 5 speed and we change the clutch on it but a lot of fluid came out of the tranny nothing you can do about that but i want to know what type of fluid i put back in everybody has some different to say well i hope somebody can help me so i can put back in the road thanks.	stang1990	6	2358	Jul 19, 2009 by stang1990
	aod vs aode any difference (Preview) is there any difference between the two? which would be better for a 700hp at the motor street/strip car?	91notchback	8	2711	Jul 11, 2009 by 91notchback
	flywheel and clutch torque (Preview) Anyone know the torque specs on a 97 cobra 4.6 flywheel and clutch assembly?? thanx for any help...	Rob	3	2392	May 29, 2009 by Rob
	Which transmission (Preview) what transmission should i use for my mustang? i want to have a street car with about 500 hp off of nitrous but with it on 700 hp im using a nine inch ford with 4:10s i want to know which is the best for a semi street car. a powerglide, an aod or a c4. please help me out -- Edited by 91notchback on Sunday 17th of May...	91notchback	15	3088	May 19, 2009 by Mineral 02
	question about my tremec tko? (Preview) i have a tremec tko transmission in my car. i think the tranny mount is broken or worn out. is there a specific mount i need for tremec or can i use any tranny mount. thanks -- Edited by DMURB on Tuesday 19th of May 2009 04:40:55 PM	DMURB	0	1852	May 18, 2009 by DMURB
	Broken (Preview)	mikefheath87	9	2441	May 3, 2009 by LX st50ng 93
	Im home finally and tryin to diagnose this problem (Preview) Hey guys wutsup..finally home after bein in Combat Trainin and Air Crew trainin for 6 months...Alright here is the lowdown..shift into 1st doesnt catch till clutch is almost all the way released..then grinds starting off then goes away....shift into second normal if i slightly give it gas it will g...	Yanni5.0	3	2038	Apr 4, 2009 by cobraman24
	clutch tool (Preview) looking for clutch alignment tool for my stang need ASAP	wheels	4	2255	Feb 16, 2009 by wheels
	fidanza clutches (Preview) fidanza clutches are they any good or junk what do you recommend	droptopfox	5	2297	Jan 2, 2009 by Mustswang
	MGW Shifter (Preview) Hey guys/gals wondering if any of you have driven a fox body with a MGW shifter in it and how you liked it? I have a 1992 Mustang GT with a Tremec 3550 in it. I was thinking of putting in an MGW. I have have driven an 04 Cobra with one and I really liked it. Any opinions?	rbaxter85	11	4724	Jan 1, 2009 by rbaxter85
	Will this work? (T5 shifter setup) (Preview) I have a Steeda Tri Ax shifter on my T5 now. Well I have always loved the look of the Hurst shifters. Reminds me of an old muscle car, as well as the hurst shifter I had in my old truck. My question is, if I order this hurst shifter stick, not the whole shifter assembly, just the stick, ball, and boot, will it bo...	boostd710	4	2027	Nov 24, 2008 by boostd710
	t-45......? (Preview) question i have a t-45 in my 00 gt and im having a 5.1 modular stroker put in my car with cms/vt stage 3 blowers cams, and a p1 procharger... looking for 550 plus..... should i upgrade tranny and what to...?	fast2000mustanggt	1	2095	Nov 16, 2008 by LX546
	clutch and flywheel PICS UPDATED (Preview) blew my clutch into pieces tonight on the highway shifting into 4th racing a import need opinions on what clutch flywheel and throwout bearing i should get need it quick probally have to overnight it -- Edited by wheels at 20:32, 2008-09-23	wheels	11	3917	Sep 24, 2008 by LX546
	Think my clutch is going (Preview) took the whip out for a ride today and noticed if i have the car in 2nd and slow down clutch depressed then if i slowly let the clutch out and give it some gas it grindsss till i get a good paste goin!!! ahhh gives me chills up the spine wen it does this	Yanni5.0	2	1998	Aug 25, 2008 by Yanni5.0
	T5 Front Bearing Retainer Ford (Preview) Does anyone know if the 88GT T5 Bearing retainer is different from the 94's? I have one from both and the 94 is longer and the part closest to where it bolts to the tranny is a wider piece for about 1 1/2. If you have this info please give me a call 508 406 1126	JIM	13	2805	Aug 4, 2008 by fuck bostonstangs
	tr3650 (Preview) tranny is leaking out the back is that something i can fix let me know thanx WHEELS	wheels	3	2113	Aug 3, 2008 by Big Frank
	my 2 tranny's (Preview) i have 2 borg warner tranny's i was told both are t-5's and was also told there both t-56's. anyone know how i tell what the hell i have. thanks	andyss420	8	2424	Jul 4, 2008 by Mustang5L5
	Astro Performance's A-Five Transmission (Preview) Astro Performance's A-Five Transmission	JIM	1	2118	Apr 7, 2008 by George
	Random I know. (Preview) I went to mustangspecs.com and deciphered my vin and the codes inside in the door. So it turns out that the car was AOD even though the kid told me it came standard. But I learned little cool things about my car that I didn't know before. I don't why I'm posting this mostly because I'm bored but ahh yea I said...	SPDoherty	0	2032	Feb 17, 2008 by SPDoherty
	swiching a 95 from auto to stick. what do i need? (Preview) i have a 95 i want to switch from auto to stick. i will rob every thing i can from my 86. but what will i need that is not in my 86. all i can think of is the clutch pedal setup. what am i missing that will not be the same? thanks	wadman	0	2027	Feb 16, 2008 by wadman
	Throw-Out bearing replacement...what to look for (Preview) ya so the throw out bearing shit itself in my car, anything speical i shuld know about before i go replacing it?, im gonna throw a new bearing retainer on the tranny too...if the clutch looks ok, it will stay because i have no money and no job right now, just wondering if therres anthing special i gotta to t...	Big Frank	2	1915	Feb 6, 2008 by 89Rustang
	j-mod for autos (Preview) link will show all info and probbly anwser all your questions http://www.tccoa.com/articles/tranny/index.html#	uatlb	0	2058	Jan 11, 2008 by uatlb
	buy j-mod for autos (Preview) http://www.vapauto.com/jmod.htm -- Edited by uatlb at 16:31, 2008-01-11	uatlb	0	1939	Jan 11, 2008 by uatlb
	Have a question..... (Preview) Hello and I know I haven't been around lately, just been busy. But I would like to ask some of the guru's out there about this question....... It is relating to a specific transmission that I am thinking about to use with the set up that I currently have "written" up. Yes, it will be a Fox Bo...	slyman	6	2443	Dec 12, 2007 by Autoteknix
	4cyl T5 question (Preview) i am switching my 89 4cyl auto over to a five speed.in the local junk yard there are 2 88 4cyl mustangs and a turbo coupe t bird.i was wondering if there was any difference between the mustang 5 speed and the turbo coupes.if the birds is better then i will buy it.any suggestions are appreciated! mark	mb93gtconv	2	1930	Oct 23, 2007 by mb93gtconv
	What is the best Tranny for my stang? (Preview) I was wondering if i could get some suggestions from you guys and tell me what is a good tranny to buy. Its an 86 gt 5-speed.	86gtTracey	3	2247	Oct 17, 2007 by 86gtTracey
	Rebuild T5 Transmissions (Preview) T5 Tranny kits	JIM	0	1944	Aug 2, 2007 by JIM
	Gear oil? (Preview) Hey guys can i use gear oil in my T5 tranny or use tranny fluid -- Edited by bostonstangs......jim at 11:14, 2007-03-18 -- Edited by bostonstangs......jim at 11:15, 2007-03-18	JIM	6	2172	Jul 17, 2007 by Pat
Page 1 of 1 sorted by