BOSTONSTANGS.COM

okay this may be a stupid question i found instructions on how to adjust them on line i did one side and plan on doing the other side in the morning but i started it now it runs like crap would it do this with one side adjusted and the other side not...

hey guys... when im driving down the highway usually in overdrive so not accelerating sometimes i get a vibration i think in the tranny im not sure though its like a 4 second spurt if i let it go, but if i lift off the gas it stops... or step on the ...

hey guys my engine may have craped the bed on the way home from school this weekend havin it checked out now but i already have another engine i can put in. im just wondering if you guys know of any good shops to go to and a price estimate. Thanks....

so i put on a new exhaust set up yesterday. new x-pipe and catback. my o2 sensors were frozen into my old h-pipe and i could not get the out, so i just threw some bolts in the new x-pipe and proceded on with the install. well today my car is having ...

i wanna build a stroker over the winter any info would be great like brand of kit 331 or 347 or should i get .30 or .40 over thanks...

i was wondering should i paint my engine ford blue or red to match the car??? im not really sure what to do...vote to help me find out which one to do ... i thought ford blue to keep it traditional or red to match everything ... ... -- Edited by ...

was the 4.2 v8 avalibale in the 82 notch or just the 5.0 looking at one the guy doesnt know witch it has...

i bought a k member that use motorplates i was wondering were to get the mid plate? i have the front im just wondering were to get a nice midplate for cheap thanks all help is appriciated ... ... -- Edited by 91notchback on Sunday 7th of June 20...

Well I had this problem after I installed my motor so I changed the headgaskets thinking they they were bad, now I finished everything and I still have the same problem. Does ne1 no wat this means plz so close to driving my car but this is holding me...

D.S.S level 10 cnc block questions for a 351 i want to know how much horse those blocks could handle? is it alot more than a stock block? any help would be appriciated thanks...

i got motor plates and have dual plate brackets for my t trim didnt kno if i can use my front plate and still attach vortech brackets if i cant i got some problems...

Ok so my check engine light came on and it said maf or 02 sensor code anyone can fix it cheap . Ive gotten $400 dollar estimates but im a little mechanically inclined so i wanna do this cheap i dont have the $400 to spend more like $100 maybe i could...

My check engine light keeps poping on. On cold starts or even when its cold out such as at night leaving work, my check engine light is on. During the day or if my car gets warmed up to operating temp the check engine light will turn off. My buddy...

after about a 20 min drive my car started to pop from the exhaust and giving it throttle produced no power. i limp it home and it dies right infront of my house (thankgod). i pop the hood and the fuel pressure was still reading about 30 psi. i went t...

i had my motor out this winter i put aluminum heads and an E-303 cam in it now my car wont idle rite can anyone tell me wat i can do to fix this... i talked to a buddy who did the same thing to his car this winter and he is having the same problem....

... ... ... ... *-- Edited by Gina on Sunday 3rd of May 2009 09:48:36 PM*

... ... ... ... -- Edited by Gina on Sunday 3rd of May 2009 09:48:36 PM

i replaced my head gaskets on my 302, after i torqued everything to the right specs, i added antifreeze and water, next thing u no, i saw liquid pouring out the rear of both sides of my heads, does neone no with this means or what is wrong with my ca...

Downs upper intake. Ok long story short I just bought a Gt with some work done to it and I have been hearing to dump the Downs upper intake for a Cobra or GT40. Is this right or can I keep it. Is the intake really taken power away from the car?? Than...

my 91 gt has been randomly not starting sometimes it will be days fine and then when im far away from my house or by myself somewhere it just decides not to hot start ive tryed every idea ive gottin i put new plugs wire cap rotor distributior module ...

i was wondering when you bore and stroke a older 351 to a 427 will the crank have any clearence issues??? and how much power could the older block handle???????...

67 - Clutch switch circuit failure 81 - Air management 2 circuit failure 26 - Mass Air Flow (MAF) out of range 66 - Mass Air Flow (MAF) signal low 16 - IDM signal not received 94 - AIR system inoperative i got these by counting the check engine l...

i took one head off today it got dark before i could do the other. but my piston wasnt like this before i have pitchures of them before the shop did a head gasket. well good thang i was pllanning on getting a new engine anyway, ... ... ... is .20 ...

Just got a free pair of e7te heads and there covered in surface rust. would they clean up if I had them machined and replaced the valves? already plan on putting a spring kit on them so all that stuff is getting replaced. Please give me your input...

ok so i was under the hood today checkin stuff out and my buddy had shut my car off and noticed the fuel pressure gauge leaked down very fast. Is it just because it on the fuel rail or do I have a bad injector(s) ...

i just put 30lbs injectors on my car with a pro m mas air and a 75mm tb iit runs great no problems except everytime i let off the gas fast it dies any idea what it could be it kinda anoying ...

Any ideas? I'm in Iraq now but will be hooking shit up when I get R&R sometime soon, so anyone know? Thanks....

just installed 24# injectors, regulator, and a 70MM throttle body on sunday. I have the pressure at 38 psi with the vacuum disconnected. Any ideas for tuning the fuel psi? ...

is a mexican block much better than stock im looking for a block for my car im running nitrous so i want it as strong as possable but i dont want to pay 2000 for a dart block ,what is a ready to go mexican block worth and does anyone have one to sell...

Im debating on whether or not i want to do a 351 swap in my car. Ive heard you can use 351 heads on a 302. Is that true? What is the power difference from a 302 to a 351? Which would handle nitrous better ir either of them would?...

would my car do better with oval or round TB????? ... ... round to oval ... ... ... ... ... -- Edited by wheels at 12:10, 2009-02-13...

i finally have the funds for a h/c/i combo. so far i have a pretty much stock motor with the exception of a large throttle body and mass air meter with a tuned cai. ... ... my budget is $2k my best option looks like this topend kit by LRS ... http:/...

i know that the plug is in a different spot and thats why the wires dont fit well. i dont want 2 buy the special headers for the heads and was wondering what other people are doing about this. i have equal lenght headersand was wondering if shortys o...

i can get a set of twisted wedge heads cheap off a friend but there O-Ringed, my ? is do i have to cut my block for the o-ring or just bolt them down and use special head gaskets for them. never used them just thought i would ask first...

what speedo gear do i use ? ,....my car has 3.73...thanks

is the timing gear pin removable i have a cam i bought used and its missing is there anyway to get a new one ...

So I recently bought a 1988 GT/COBRA clone and it has all the goodies I wanted but there is one problem that bugs me and I can't, for the life of me figure it out...when the car is idling, there is like this shreek/howl that comes from the holley sys...

i put in over the summer a freshly rebuilt motor, brand new everything but crank and block. car runs great then my stock guage kept dropping at idle sumtimes so i thought i was the guage, then i installed a bunch of autometer guages and it drops to 1...

Alright guys just doing some early research for when I am ready to buy...Has anyone ever gotten a Ford Racing crate motor? If so I'm wondering if they really put out the power they say they do once you drop it in the car...Any thoughts on this motor ...

im looking to buy forged pistons for my stang 5.0 are mahle pistons any good or are they crap

i have a motor from a 1999 explorer i bought mostly for the heads and intake but it has low milage (35k) and my 1991 mustang gt 5.0 has high milage (160k) i want to use the whole explorer motor is it better than a mustang motor i was told to change t...

http://www.svtcobraltd.com/351Swap.html

i have absolutely no vacuum form the engine. it idles well but has no power. it also blows smokey oil out of the pcv system. i adjusted the rockers with the lifters completely dry-i don't know if that's why.... so im going home now and will check the...

if i put an engine with a different cam and bigger injectors on my truck could this cause a MIL light to come on. if it does ill just put stock cam and injectors back on. i know alot of you guys have upgraded 96+ mustangs ...

Alright guys, need to know if you can take a 5.0 HO upper and lower mainfold and put it on a 1985 motor? i believe that you can, just want to make sure. and yes, i know that we will have to switch out to a electric Fuel Pump and all that other fun s...

Anyone know were I can get the steal lines that run from the oil cooler (from the oil filter area) to the intake manifold (near the thermostat). Mine are rusted out and leaking. Ford stopped making them 8 years ago and no one seems to have one onli...

So on my way to FFW on Friday, I got on the highway and the car started to misfire. (Sooooo pissed but what can you do.) I turned back around and brought it back home. The check engine light came on so I took out my code reader and checked the co...

Just picked up another turbo from a 2.3 t-bird...think im going to attempt a backyard turbo set up...what do you guys think? and my license will be in hand by Sept 21st so i dont wanna hear "Ohh get your license back first" lol...

been about 13yrs since I did this job on a 5.0 and prev have only done it 2 times using a haynes. Any tips as to what I should do while I'm there? thanks fellas Cortes...

i have a gt 40 setup on my stock shortblock.... is there anyway of runnin my 42 lb injectors or is that just way too overkill? any input is apriciated...

im having some problems with my car. when im driving it will intermittently cut out completely like the ignition is turned off pr it is out of gas. sometimes it gets so bad i think i need to pull over but it has yet to strand me. it flashes the MIL ...

	No New Posts		New Posts
	Topic is Closed		Sticky

Forum Information
Total Posts: 952
Moderators: uatlb, mikefheath87, Ed