So the other day I take my car out for a ride and noticed that my Autometer tach is off from my factory tach by roughly 500rpm. My factory tach now is the accurate one where i thought the autometer one would be more accurate... When im idling at ab...
well im pretty happy with how my car is running right now, so its time for a suspension upgrade, not sure if i want lowering or not, i run 16" rims and will being going to 17" cobras soon i think. so im looking for something that is going t...
so the other day my outside passenger door handle broke, not off but no longer opens the door. Anyone want to put a new one on for me? I'll pay, quote me a price to do it... I'd attempt it, but have no clue how. thanks guys....
My e-brake cable snapped on me the other day. Now when i drive, i hear a noise that could be the rear e-brake partially on, or the cable hanging on the driveshaft or something cause its only when the car is rolling. Not sure exactly what it is. I ...
ok this is the deal i have a 1990 mustang gt convert i am trying to put stock struts with stock c/c plates and they will not fit i was told 87 to 89 & 90 to 93 are diffrent well i have tride both and nither fit please HELP ME figuer what the hell...
I just got my car back today... I got a new starter put in after mine shit the bed and both starter bolts broke trying to get the old one out. The starter is a hi-torque mini starter from napa cost me $190+ labor to get the broken bolts drilled out...
i was going to install an electric fan in my fox. I dont have the relay for it to turn on and off automatically so i was just going to put it on a togle switch. But my question is should i put it on a fuse. And if so how do i wire that up battery to ...
so my cars ben running decent , i need some new suspension every little bump is killing my car lol bolts keep coming loose. im looken for something good for dailydriving and some beter handle would be nice too. i would like to lower it slightly from ...
I keep blowing headlight bulbs due to my passenger headlight housing leaking water/condensation into it. They are ultra clear headlights from latemodelrestoration.com. I sent them back once and had them replaced for free already and they have done ...
my starter just shit the bed. I have no tools at my house to do this and my car is now a paper weight. Can someone help... I live in worcester by the airport. 508 963 9854 - Jay...
i just picked up a 98 gt with a blown head gasket. i was told that in these motors if the car sits for a while with a blown head gasket i might as well just buy a new motor. is this true. can i just replace the head gasket and be fine or should i do ...
well my girlfriends 05 trailblazer stalls randomly while either taking a turn while not on the gas or sometimes just going from reverse to drive. the rpm's drop to the point where it shuts off. any ideas??...
okay my buddy has a 98 f150 its been a great truck so when the head gasket wennt at 230k we decided to do a 5.4 swap so now its a 5.4 from a 97 expedition he wants more and has a set of patroit stage3 heads sitting around from a lightning would he se...
Hey so as some of you know i finally have found a car, a 97 gt, and now am trying to figure out what to do to it. Im trying to figure out how to gain both low end and high end power, with not alot of money at the time. I dont plan on doing everything...
so the MAF and TPS went bad. car wouldn't idle, when driving it hesitated and sounded like it was missing. the second i pressed the clutch it would shut right down. replaced the MAF, injectors, and TPS. now the car will start up cold, surge for a few...
Not sure if anyone on here knows, but my dad has been looking at a new motor for his firebird. It is a pontiac 400. If he gets it he can go with either a 650 with vaccuum secondary or a 750 with mechanical. I am not sure on the brands but will find o...
i have an 89 with a 306 in it. it has a 70 mm bbk tb. this car used to be supercharged but when i bought the car it was no longer in it. they put the stock air box in it with the stock rubber piping. i think the air meter is also back to stock. how d...
hi guys me and my father in law are trying to fix his stang little by little. my question is everytime we give it gas and rev it to like 4000 rpm and up it hesitates and it wont go even when im driving and i try to go faster it just wont go it hesita...
I have new lines for a 93 cobra brake setup. New booster and MC for a two line setup. Has anyone made their stang identical to this setup? I need to by a new porp valve. Any suggestions?...
just cruising around i noticed my car hesitates pretty bad below 2500 rpm's
kinda bogs out and works itself up the rpm's
once it hits 2500, it takes off...
i got no codes or symptons really. fuel filter and plugs are new. has a brand new topend. ...
i have a clean 1986 2wd ranger 6 foot bed 4cyl 5 speed
i also have a rebuilt 93 5.0 bolted to a new t5 and new clutch
making motor mounts,exhaust,drive shaft ,fuel lines return lines that's all easy stuff for me
my question is has anybody on her...
2000 GT 4.6 SOHC WINDSOR 96,000 miles. Ive run nothing but mobile 1 since 54K.
Ive been hearing a noise for some time now ONLY WHEN THE ENGINE IS COLD. It started off light but is now getting worse (louder)!! Once the car warms up it goes away but ...
i had just bought a 98 gt but the owner had lost the key so i put a new steering column in it and now it wont start and the theft light blinks does anyone know how to fix this without bringing it to the dealer?...
buying a used nos kit off a friend dirt cheap for my 04 gt
it is a wet kit wondering if anyone knows of any writeups and or where i hook up the fuel??...
i have a 89 mustang gt with rear disc brakes on it well i too the rear axels out of a 91 mark 7 and i have the brakes that go with that well i dont know what i should use for brake cables any one know how i should do it or where i can have them made ...
ive done some research on the swap i know you can use the intake on the 5.4 or can swap and use the addapters for the 4.6 and you need to get an 8 bolt flywheel.... shortied headers from 4.6 bolt right up and that ecm,harness is the same needs bigger...
my buddy bought this car and its got a pretty bad starting problem once its hot, here's his post from another site...
"I have a '93 5.0 lx with very low miles. The car starts cold and runs perfect. When I shut it off and try to restart it while...
hi, so since im selling my stang i figure ide pick up a nice daily driver for now . i was seriously considering a mark 8, seems like the next best thing from a mustang and a nice cruising car. i was wondering if there are any really bad problems in t...
aright so i just put a 5" tach in my car, and everything works fine, i hooked up the light inside the tach to the parking lights, the switched power to the tach to a switched from the ign. switch, and obv ground to ground and the other wire to t...
1990 mustang GT ...buddy has 17x9s all around 4lugs ...thinking about running 275s on the back which shouldnt be a problem but the fronts i think they will rub so maybe 255s ? car is lowered a little not sure if that will come into play ...what tire ...
not sure what to use ... ive got enough stuff to do before i buy a meth kit but im at the point i would need to mock up a intercooler for fitment....wasnt sure about pros and cons of each and the better of the 2?
thanks...
i have a 90 mustang with 4lug disc brakes need 2 know what cables to get some people say the svo mustang cables will work does anybody know for sure...
i have found a 1980 Capri (Mustang) and i have some questions. its all stock 4 cyl. 4 spd. and i want to know if it has a posi rear end and i would also like to know how close the interior is to a Mustang GT?...
So I cannot have a passenger in my car without scraping my exhaust on the FLAT GROUND! If I go over the crown of the road, or if I hit a MINOR bump I scrape my H-Pipe. I looked at it, and the owner before me cut the hangers off the H-Pipe. Now I n...
Is there a specific year that i have to order to work with my 2000 GT?
Ive been looking around but cant find much, some say 99 04 and some say 01 04! I just want to make sure before i buy one....
i bought a fuel cell for my car that has a gm sending unit i can buy a 90-10 ohm or a 70-30 ohm i realy wanted to use my factory fuel gauge to keep the orig cluster...
the dick where i got my sticker failed me because my exhaust is too loud. its only flowmasters with an off road x pipe. besides switching my exhaust, is there any way i can quite it down just for an hour or so to get a sticker? ... ... -- Edited ...
my car is a 1990. So the other day I noticed that my passenger headlight both high and low beams were out. So I go pick up a set of sylvania bulbs and replace both passenger and driver headlights. Everything was fine that day and night, then the ne...
hey guys i hope one of you can help me out here... im changing my interior over to black so i took the original dash out changed the heater core while i was at it put the black one in and now the car does not start... everthing works fine, lights, ho...
i keep getting this code and i dont know why
i simply upgraded the injectors and got the matching pro-m 75mm maf calibrated for the 24lb injectors. ever since its been hooked up my car runs sluggish at random times... most noticeably after its been ...
